Ax88772b Linux Driver !!EXCLUSIVE!!

Ax88772b Linux Driver !!EXCLUSIVE!!

Download File >>> https://tiurll.com/2tvDIR

How to Install Ax88772b Linux Driver !!EXCLUSIVE!!

If you are looking for a low-power USB 2.0 to Fast Ethernet controller for your Linux device, you might be interested in the Ax88772b chip from ASIX. This chip supports a variety of features, such as IPv4/IPv6 checksum offload, Wake-on-LAN, VLAN filtering, and more. But how do you install the Ax88772b Linux driver on your system In this article, we will show you how to do it in a few simple steps. !!EXCLUSIVE!!

Step 1: Download the Ax88772b Linux driver

The first thing you need to do is to download the Ax88772b Linux driver from the ASIX website. You can find it here. You will see a list of drivers for different operating systems, including Linux. Choose the one that matches your Linux kernel version and architecture. For example, if you are using Linux 5.10 on a 64-bit machine, you can download the AX88772B_772A_760_772_178_LINUX_Driver_v5.10.0_Source.zip file.

Step 2: Extract the Ax88772b Linux driver

Once you have downloaded the Ax88772b Linux driver, you need to extract it to a folder on your system. You can use any tool that can handle zip files, such as unzip or 7zip. For example, if you downloaded the file to your Downloads folder, you can run the following command in a terminal:

unzip /Downloads/AX88772B_772A_760_772_178_LINUX_Driver_v5.10.0_Source.zip -d /ax88772b

This will create a folder named ax88772b in your home directory, containing the driver source code and a README file.

Step 3: Compile and install the Ax88772b Linux driver

The next step is to compile and install the Ax88772b Linux driver on your system. You will need some tools and libraries to do this, such as make, gcc, and linux-headers. You can install them using your package manager. For example, on Debian-based systems, you can run:

sudo apt-get install make gcc linux-headers-$(uname -r)

Then, you need to change to the driver source folder and run make:

cd /ax88772b

make

This will compile the driver and create a file named asix.ko in the same folder. This is the kernel module that you need to load to use the Ax88772b chip. To install it on your system, you can run:

sudo make install

This will copy the asix.ko file to /lib/modules/$(uname -r)/kernel/drivers/net/usb/ and update the module dependencies.

Step 4: Load and test the Ax88772b Linux driver

The final step is to load and test the Ax88772b Linux driver on your system. You can load it manually by running:

sudo modprobe asix

This will insert the asix.ko module into your kernel and create a new network interface named ethX (where X is a number) for your USB Ethernet device. You can check if it is working by running:

ip link show ethX

You should see something like this:

3: ethX: mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000

link/ether xx:xx:xx:xx:xx aa16f39245